PALMisLIFE 討論區

標題: iPad 備份 ECID SHSH 教學 [列印本頁]

作者: 阿輝 時間: 2010-5-1 09:33
標題: iPad 備份 ECID SHSH 教學
總之就是提前做好準備吧～

1. 進入恢復模式

a. 不要連接傳輸線，然後關閉 iPad 電源
b. 按著 Home 鍵不放，然後接上傳輸線
c. 一直等到螢幕出現傳輸線圖片，就可以放開 Home 鍵，此時已經進入恢復模式

[attach]33435[/attach]

2. 執行取得 ECID

請下載並解壓縮附件

[attach]33427[/attach]

點選  GET ECID  按鈕，成功的話上方會出現數字，就是你的 ECID
請複製並保留起來

[attach]33434[/attach]

3. 備份 SHSH

請下載必解壓縮附件 umbrella （註： umbrella 需要 Java 才可以執行）

[attach]33428[/attach]
[attach]33429[/attach]
[attach]33430[/attach]
[attach]33431[/attach]
(分割壓縮，請放在一起並用最新版解壓縮軟體解壓開啟)

複製剛剛取得的  ECID 號碼，下方選擇 ipad3.2 然後點選  Submit
這樣 SHSH 檔案就會被儲存到 umbrella 目錄下

[attach]33433[/attach]

打完收工～

作者: AlexPro 時間: 2010-5-3 00:19
幫忙分流 umbrella 2.22

作者: ShotLiang 時間: 2010-5-3 20:05
本文最後由 ShotLiang 於 2010-5-3 20:22 編輯

在VMWare下的XP執行ECID Grabber會顯示程式錯誤, 無法執行
...
改用下面網頁教學
http://www.techpetals.com/how-to-grab-ecid-for-iphone-3gs-os-313-on-windows-mac.php
=======

Grab iPhone ECID on Windows

Connect your device to PC via USB and then turn it off.
Now press and hold Power Button + Home until iTunes logo appears on your device. This will put your iPhone in Recovery Mode.
Download, install and run USBView
Click “Config Descriptors” in “Options” menu of USBView, then press F5.
A list of your USB devices will appear, search for “Apple Mobile Device (Recovery Mode)”.
Select your device. Details will appear in device descriptor section on right.
You will see a 16 digit number corresponding to ECID, e.g. ECID: XXXXXXXXXXXXXXXX. That’s your ECID.
Next you need to bring your device out of Recovery Mode. For this, hold the Power Button + Home for 10 seconds.

Grab iPhone ECID on Mac OS

Put your device in recovery mode by following step 1 and 2 above.
Now go to Applications > Utilities and run “System Profiler”.
A screen will pop out, select “USB” from section on the left, it will show list of connected USB devices.
Select “Apple Mobile Device (Recovery Mode)”.
This will show device details, you will see a 16 digit number corresponding to ECID, e.g. ECID: XXXXXXXXXXXXXXXX. That’s your ECID.
Next you need to bring your device out of Recovery Mode. For this, hold the Power Button + Home for 10 seconds.
=======

歡迎光臨 PALMisLIFE 討論區 (http://f.pil.tw/)