Originally posted by czh at 2005-1-31 11:20 PM:
WMV只會出現聲音,沒畫面Orz
Originally posted by czh at 2005-2-1 12:00 AM:
目前就算KINO不用來撥影片
撥MP3/WMA還是比內建的還棒
細節比較清楚而且與內建的一樣支援線控
清單功能也比內建的好用
Originally posted by gpc at 2005-1-31 11:11 PM:
整理後post上來,已經可以順利播放wmv了!
註A:WMV1播放比較順暢,WMV2串流值太高就不太行,WMV3就不支援了
註B:ffwmav2的解碼卡卡問題應該是解決了吧
Originally posted by crazyx at 2005-2-1 11:13 AM:
C3000確實如czh所言播放不能
只好等看看有沒有更新版
目前我主要還是用dr.z看mpeg4
真希望能有再比之更流暢些的軟體出現
音樂播放方面就真的方便不少了
Originally posted by czh at 2005-1-31 23:20:
C3000的場合
kino2_0.4p2_arm.ipk + mplayer-bvdd_1.0.0-1_arm.ipk = 播放不能Orz
bvdd_0.1.0-1_arm.ipk (In only substance memory installation possibility)
It is the driver in order to access LCDC of PXA270. Because it becomes necessary to the case where one for SL-C3000 mplayer is used, please be sure to install. In addition, after the completing the installation, it meaning that the dialogue which urges restart occurs, please note.
Originally posted by czh at 2005-2-1 06:08 PM:
當然是已經裝了kino2 + mplayer-bvdd + bvdd
而且也依順序了
mplayer也有保留kino2版與dvdd版
兩者交替使用,kino2版可以撥但是畫面怪怪的
一改用dvdd就完全不能播放
Originally posted by MobileSuit at 2005-2-2 07:14 PM:
So could someone be so kind as to post the proper parameter(s) for using this version on C860 please? I am confused by the tons of posts talking about different versions and breeds. Thanks in advance.
Originally posted by gpc at 2005-2-2 10:17 AM:
我用c860,先安裝kino2 0.4p2 再安裝mplayer100
歡迎光臨 PALMisLIFE 討論區 (http://f.pil.tw/) | Powered by Discuz! X2.5 |