[敗家] SmartDisk FlashTrax 上市了

小酒蟲

<center>
</center>
http://www.smartdisk.com/Products/DigitalMultimedia/FlashTrax.asp

內建 30GB HDD，可做為 DC 隨身碟、MP3 player、隨身電影院....
  
Display:
  
LCD: 3.5” (diagonal) color TFT LCD with CCFL backlight  
TV monitor output: NTSC or PAL, Composite video  
JPEG format viewing, with hardware zoom in/out, pan/scroll, rotation support. (Some RAW format as well as GIF and BMP files can also be viewed.)  
Video: Motion JPEG picture decoding,  
up to 320 x 240 x 30 frames/sec or 640 x 480 x 10 frames/sec  
Can view simple text files (*.txt)  
  
Audio:
Stereo analog line out or earphone jack  
Built-in speaker  
MP3 and WAV formats. Plays MP3 files encoded up to 320 kbps bit rate; can play VBR encoded files

[ Last edited by 小酒蟲 on 2006-1-2 at 06:08 ]

east_mount

真漂亮啊,不曉得上市價格多少??

HALO

500美金.....
  
好想要...
  
但實在不太好敗的下手啊啊啊啊啊啊啊~~
  
不曉得它的TV OUT的效果怎麼樣...
  
能不能拿來看VCD..@@"

小酒蟲

<ol>我比較在意的是：
<li>對 RAW 的支援度。
<li>電池的耐久力。</ol>

necobi

看起來好像不支援MS PRO？？

小酒蟲

吃 CF，其它請愛用轉卡。
（CF 萬歲～～～）
  
目前似乎只有 X-Drive I、II 能直接吃 MS Pro。

HALO

小酒蟲 wrote:
<ol>我比較在意的是：
<li>對 RAW 的支援度。
<li>電池的耐久力。</ol>

  
Does FlashTrax read RAW format data (from Canon, Nikon, etc)?.  
FlashTrax can read any RAW format files from flash media and store them on its hard drive, just like JPEG’s. FlashTrax also provides the ability to view many RAW format files on its LCD.
  
看來是可以....
  
What is FlashTrax’ battery life?
It depends on what you’re doing: For MP3 playback, it’s about 3 hours. When using the LCD to view photos, it’s about 2 hours
  
有點短.....不知除了插ac之外能不能插車充...

小酒蟲

How much data can be transferred from CF before the battery runs down?
  
It depends on the flash card manufacturer, capacity, and number of separate transfers, but generally about 4 to 6 GB of data can be transfered before a full battery charge is depleted.
  
For example, you can transfer a full 256MB flash card to the hard drive about 18 times before depleting the battery (assuming LCD on).
  
電力大致上看來和 X-Drive 是同一水準，不過好像可以把 LCD 關掉進行 copy，那可能會多一點點吧？

小酒蟲

自行更換硬碟法：

• Attached the new harddrive to your PC laptop (you will need a 3.5/2.5" cable adaptor) and then just partition the drive to it's full size, but do not format it.
• Open the flashtrax by removing the 5 tiny screws on the underside (one of them is hidden under a sticker). Gently prise apart the 2 sides of the flashtrax.
• VERY gently remove the ide cable from the end of the hard drive. Just use gently pressure and move it back and forwards. There are also 2 self adhesive rubber pads on the old drvie whcih should be removed and fitted to the new drive.
• Attach the cable to the new drive and refit into the case (it just lies on top of the circuit board), and refit the Flashtrax back together with the 2 screws.
• Bitt up the flashtrax and in the setup menu, go to the sub header "default etc" and then select "Format Hard Drive".
• That's it.

[ Last edited by 小酒蟲 on 2006-1-2 at 06:07 ]